Choose a template : phpdig.html black.html simple.html green.html grey.html yellow.html bluegrey.html terminal.html linear.html lightgreen.html newspaper.html corporate.html gaagle.html

Powered by PhpDig


Search display results
and operator  exact phrase  or operator 
Select a site to search: Restart

Results 1-10, 10 total, on "side edges" (0.05 seconds)



1. [100.00 %]  Rubik's Revenge Solution - Top Bottom Edges
limit to http://helm.lu/, this path : cube/solutions/revenge/topbottomedges/
... TOP/BOTTOM EDGES: RED FACE Let's start by completing the Red Edges. The premise for this step is to find and move all appropriate edges, from the two center rows, up onto the Red Side of the cube. U... ...at you can use steps 1 through 4 to properly place the pieces. It is also possible that all the Red Edges are actually on the top but ... ...ed Face of the cube is finished, lets flip the cube over and finish the Orange Side. Unfortunately fixing the Orange Side will actually temporarily mess up two of your completed Red Edges that you jus... ...itions see images below . We didn't really care before, since we were not concerned with the Orange Edges yet. We need to sacrifice a pair...
2. [28.87 %]  Rubik's Revenge Solution - Side Edges
limit to http://helm.lu/, this path : cube/solutions/revenge/sideedges/
... SIDE EDGES We will start with Row Two and then complete Row Three . Before we start, rotate your cube sideways so that it matches the image below. You will probably need to spin the second row now s... ...he Edges on the Second Row are complete! THIRD ROW EDGES To start the Third Row, position your cube as shown and line up the White/Yellow edge so it is in place. Now rotate the entire cube backwards u... ...ntil the Blue Side is up. If you examine the three remaining edges you will find that: Everything is in place - Great, you can proceed to the Centers . Two are still out of place All three are out of ... ...atch your situation to the two samples below. The procedure following each will complete all of the edges for you. You should now be done and can proceed to the Cente...
3. [13.61 %]  Rubik's Cube: Top Layer
limit to http://helm.lu/, this path : cube/solutions/rubikscube/topedges/
...Now that you have completed the Top Corners, you are ready to position all of the Top Edges of your Rubik's Cube. The Top Edges When you are finished with this step of the solution, you will have a cu... ...be that looks like this: The Four Top Edges You will need to find an edge piece that belongs on the top layer. So that you do not undo the hard work you accomplished in putting the top corners in pla... ...ce, please do not rotate any of the sides of the cube while looking for these pieces. You are only allowed to spin the bottom layer or the middle layer. We now need to strategically position your foun... ...ocess up to 4 time to place all 4 edge pieces on the top. When you have completely finished the top edges, you will be ready to SOLVE the Center Row. ...
4. [13.61 %]  Rubik's Revenge Solution - Bottom Corners
limit to http://helm.lu/, this path : cube/solutions/revenge/bottomcorners/
...be completed. This will require you to flip your cube upside down so that the semi-completed Orange side is facing up right, once again. This is a two step process. Fir... ...ey are next to each other, simply rotate the bottom until those two yellow corners are on the front side. If they are in their proper positions, you can pro... ...ners that you have just completed are on the back side of the cube. The two Green Corners will either be properly positioned or they will be in each other's position. If they are indeed backwards, per... .... This next step will require you to flip your cube over again, so that the Orange Side is on the bottom. Fortunately there is only one procedure to remember when orienting the Bottom Corners. Unfortu...
5. [11.79 %]  Rubik's Cube: Top Layer
limit to http://helm.lu/, this path : cube/solutions/rubikscube/top/
...colors may be different or they may be on different sides. If this is the case you may have to do some mental juggling to follow along. When this process is finished the top of your cube will look lik... ...e this: The First Corner You will start by solving the BLUE side of the cube. Rotate the cube in your hands until you find the corner with the colors Blue/Orange/Yellow . Now turn the cube so that th... ...ottom and is actually in its proper place - however the Blue Side is not facing up - then match your scenario to one of the situations below and follow the steps shown. When you have completely fin... ...ished the top corners, you will be ready to SOLVE the Top Edges ...
6. [9.62 %]  Rubik's Cube: Middle Layer
limit to http://helm.lu/, this path : cube/solutions/rubikscube/centeredge/
...nished the entire Top Layer of the cube you are ready to start solving the Middle Layer. The Middle Edges When you finish this next step your cube will look like this: Before we s... ...tart, rotate the top layer until the center colors on all 4 sides match the top row. This will in effect lock the two top rows into position. We're getting closer. Your cube should look like this: The... ...ly 3 possible scenarios you will face when tackling this middle row. To start, simply look at the 4 edges on the Bottom Layer and find one piece that does not belong on the Bottom Layer. Once...
7. [6.80 %]  Pyraminx
limit to http://www.helm.lu/, this path : gallery2/
... Pyraminx Main Cube Page « Login « Sidebar Georges Helm's Galleries GHG » Georges Helm's Cube Collection » Pyraminx » Pyraminx Pyraminx PYRAMINX. Tetrahedron of 102mm... ... edge length turnable on planes parallel to the faces and trisecting the edges. Ratchet mechanism. Yellow, green, blue and orange triangular stickers on white plastic. Invented and produced by Uwe Mef...
8. [6.80 %]  Magic Octahedron
limit to http://www.helm.lu/, this path : gallery2/
... Magic Octahedron Main Cube Page « Login « Sidebar Georges Helm's Galleries GHG » Georges Helm's Cube Collection » Supernova Square-1 Impossiball Skewb Dogic ... » Magic... ...ng opposite corners and trisecting the edges - and turnable on each of these planes. Triangular stickers of eight different colors on black plastic. Made in Taiwan. Date: 09/07/07 Advanced Search ...
9. [6.80 %]  Magic Octahedron
limit to http://www.helm.lu/, this path : gallery2/
... Magic Octahedron Main Cube Page « Login « Sidebar Georges Helm's Galleries GHG » Georges Helm's Cube Collection » Supernova Square-1 Impossiball Skewb Dogic ... » Magic... ...ng opposite corners and trisecting the edges - and turnable on each of these planes. Triangular stickers of eight different colors on black plastic. Made in Taiwan. Date: 09/04/05 Advanced Search ...
10. [6.80 %]  Not Cubic 3x3x3 Cubes
limit to http://www.helm.lu/, this path : gallery2/
... Main Cube Page « Login « Sidebar Georges Helm's Galleries GHG » Georges Helm's Cube Collection » 3x3x3 Cubes » Not Cubic 3x3x3 Cubes Page: 1 2 Not Cubic 3x3x3 Cubes D... ...e: 09/04/05 Views: 88 new3x340 Date: 01/04/07 Views: 82 3x3_shape_344 Date: 17/05/05 Views: 85 ONLY EDGES CUBE Date: 09/04/05 Views: 161 KING CUBE Date: 09/0...
1

 

View List of Queries
Powered by PhpDig